Aquaforest Sea Salt

Aquaforest Sea Salt for aquariums with fish and less delicate corals and invertebrates.

Instructions for use: Dissolve the salt in previously prepared demineralized water. Water temperature should be about 24°C (75°F). For salinity of 30 ppt dissolve about 3.25 kg (7.16 lbs) of salt in 100 liters (27 US gal) of water. Stir the solution vigorously for about 15 min. When the salt is fully dissolved and the solution clear the saline water is ready to use. Keep the salt in a dry and dark place. Once Dissolved, use the salt within 5 days. Keep out of reach of children! Product for aquarium use only! Reef Salt is not suitable for human consumption! Safety data sheet available on request.

How is our Marine Salt product range tested?
Our experienced team of professionals performs ICP-OES analysis to verify that the chemical composition is within consistent range and to rule out the presence of unwanted contaminants at the same time. Note. The parameters can vary slightly between containers and around a 2-3% variation is acceptable. This fl actual on is a result of both physical properties of the mix and the limitations of the processing techniques available. These variations are still smaller than the typical margin for error for popular hobbyist test kits.

Parameters of a salt are presented below:

• 24°C / 75.2°F
• Mg – 1200-1300 mg/l
• Ca – 360-400 mg/l
• K – 300-350 mg/l
• dKH – 8,0-9,0
• pH – 8,0-8,2

See More Products