Seachem Safe

Safe™ is the complete and concentrated dry conditioner for both fresh and salt water. Safe™ removes chlorine, chloramine and ammonia. Safe™ converts ammonia into a safe, non-toxic form that is readily removed by the tank’s biofilter. Safe™ may be used during tank cycling to alleviate ammonia/nitrite toxicity. Safe™ detoxifies nitrite and nitrate, allowing the biofilter to more efficiently remove them. Safe™ is non-acidic and will not impact pH. Safe™ will not overactivate skimmers. Use at start-up and whenever adding or replacing water.

Sizes: 250 g

Safe™ is the dry version of Prime® and shares all of it’s advantages; however, Safe™ is even more concentrated than Prime®.

NOTE. These directions supersede all other prior packaging.

Directions for 10 g and 50 g

Use 100 mg Safe (scoop) per each 100 L (25 gallons) as needed to reduce chlorine and chloramine or per 25 L (6 gallons) for ammonia.

Directions for all other sizes

Use 1.25 g (1/4 tsp.) for every 1,250 L (300 gallons) as needed to reduce chlorine and chloramine or use 1.25 g (1/4 tsp.) for every 300 L (75 gallons) for ammonia.

May be added to aquarium directly, but better if added to new water first. If adding directly to aquarium, base dose on aquarium volume. For exceptionally high chloramine concentrations, a double dose may be used safely. To detoxify nitrite and nitrate in an emergency, up to 4 times normal dose may be used. If temperature is > 30 °C (86 °F) and chlorine or ammonia levels are low, use a half dose.